FLEXIPADS CLAY MITT BLUE FINE GRADE

55.00
people are viewing this right now

Decontamination Clay Mitt. Removes embedded Contaminants like tree sap.

Only6 item(s)left in stock!

6 in stock

  • Free shipping on orders over 250€
  • Delivery in: 3-7 Working Days
81.00
For 2 item(s)

A Pro-quality clay style polymer surface helps remove contaminants without the use of chemicals and lasting much longer then traditional clay bars. The surface can be rinsed for re-use.

After decontamination, use the soft absorbent microfibre reverse for easy scratch free rinsing.

Stitched together with a smooth neoprene interior for added comfort and durability, with adjustable wrist cord for additional control.

Weight 0.4 kg
BRAND

FLEXIPADS

COLOR

BLUE

MATERIAL

CLAY POLYMER, MICROFIBER

PURPOSE

DECONTAMINATION

SIZE

220 x 150mm

Features

A Pro-quality clay style polymer surface helps remove contaminants without the use of chemicals and lasting much longer then traditional clay bars. The surface can be rinsed for re-use.

 

How To Use

The white powder on clay side is to protect the surface before first use.

Prior to initial use rub the Clay Mitt on glass using clay lubricant!

DIRECTIONS FOR GENERAL USE:
1. Wash vehicle to remove loose dirt and debris

2. Spray Optimum No Rinse (560ml to 3800ml) on a small section of the vehicle (Alternatively, you can use your preferred clay lubricant)

3. Gently rub the Clay Mitt over the lubricated area until contaminants are removed and surface is smooth. Wipe area with a Microfiber Drying Towel. Continue in sections until the vehicle is fully decontaminated

4. Follow with Your Favourite Wax, Sealant, or move onto compound/polish. Inspect surface of the Clay Mitt before and during use. To clean the clay surface, spray clay surface with lubricant and wipe gently with hand. After repeated use, or if too much contamination is present, discard and use a new Clay Mitt.

* Do not soak in liquid
* Do not squeeze or wring out
* Do not store laying flat on clay media surface
* Do not store wet in air tight containers

USE BEFORE WAXING: to remove surface contaminants

Reminder:

  • Minimal pressure
  • Straight cross motion
  • Spray Lubricant
  • A few passes then check
  • Wash with lukewarm water between panels
  • Wash and air dry after each use

This item must be used with a clay lubricant, not just water.

You may also like…